石膏砂浆设备
current location : Home > Industry news > Shaanxi Xinxing Textile Co., Ltd. introduces the daily maintenance guide for weaving machines

新闻资讯News

联系我们Contact Us

Shaanxi Xinxing Textile Co., Ltd

Phone:+8618829581429

Contacts:Manager Sun

Website:cn.xxfzb.com

Address:Jiangzhang Town Industrial Park, Fufeng County, Baoji City, Shaanxi Province, China

Shaanxi Xinxing Textile Co., Ltd. introduces the daily maintenance guide for weaving machines

2025/4/23 14:52:00
http://cn.xxfzb.com/news1071118.html


Shaanxi Xinxing Textile Co., Ltd. introduced that the weaving machine is an important equipment in textile production, and its stable operation directly affects production efficiency and product quality. In order to extend the service life of the weaving machine and ensure its efficient operation, daily maintenance is crucial. Today, Shaanxi Xinxing Textile Co., Ltd. will introduce to you the daily maintenance points of the weaving machine:

1. Cleaning and maintenance

Regular cleaning: After the end of production each day, flying flowers, dust, and oil stains on the weaving machine should be removed, especially on key parts such as the shuttle track, frame, and steel reed, to avoid fiber accumulation affecting operation.

Lubrication system inspection: Ensure that the lubricating oil at each lubrication point (such as bearings, gears, and guide rails) is sufficient, regularly replaced or replenished to prevent wear of parts due to friction.

2. Inspection of key components

Integrated frame and steel reed: Check whether the integrated wire is deformed or broken, whether the steel reed is worn or loose, and replace it in a timely manner if any problems are found.

Shuttle and weft insertion mechanism: Ensure that the shuttle is not damaged, the weft insertion device (such as the rapier and jet nozzle) runs smoothly, and avoid yarn breakage or uneven weaving.

Transmission system: Check the tension of belts and chains to prevent slipping or abnormal noise caused by looseness.

3. Maintenance of Electrical and Control Systems

Sensors and motors: Regularly check the sensitivity of photoelectric sensors, encoders, etc. to avoid shutdown caused by abnormal signals.

Control panel: Keep the operating interface clean to prevent dust from entering and affecting circuit stability.

4. Regular calibration and debugging

Tension adjustment: Ensure moderate tension between warp and weft yarns to avoid fabric defects caused by uneven tension.

Weaving parameter optimization: Adjust parameters such as vehicle speed and opening time based on fabric variety to reduce mechanical load.

5. Recording and preventive maintenance

Establish maintenance logs: Record the time of each maintenance, the parts replaced, and any abnormal situations for easy tracking of equipment status.

Regular professional maintenance: arrange a comprehensive maintenance once every quarter or half a year, and have professional technicians inspect the wear and tear of key components.

Shaanxi Xinxing Textile Co., Ltd. shared that through standardized daily maintenance, not only can the failure rate of weaving machines be reduced, but production efficiency and fabric quality can also be improved, saving maintenance costs for the enterprise. Develop good maintenance habits to ensure the long-term stable operation of the weaving machine!